Npp16 D Efp Sa. NPP16DEFPSA Sensor Module/Housing by SENSOR SWITCH To provide system power, the power pack transforms Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC. NPP16 EFP.pdf: nLight nPP16 Power/Relay Pack Spec Sheet 1/17/2025 View: Download
Acuity Controls NPP16 D EFP SA Power Relay Pack IMS Supply from www.imssupply.com
NOTE: For further assistance, please contact nLight Wired Technical Support via: Operation Mode: automatic: Current Rating: 16 Amps: Operating Voltage: 277 Volts: Connector Type:
Acuity Controls NPP16 D EFP SA Power Relay Pack IMS Supply
NOTE: For further assistance, please contact nLight Wired Technical Support via: SA stands for Semi-Auto, Meaning that the power pack will turn off the lights when the room is unoccupied for the time set by an occupancy sensor, but will only follow on-commands from a wall switch These power packs also provide nLight system bus power - up to 40mA from each of its two RJ-45 ports - by transforming Class 1 line voltage (120/277 VAC or 347.
NPP16DEFPSA Sensor Module/Housing by SENSOR SWITCH. SA stands for Semi-Auto, Meaning that the power pack will turn off the lights when the room is unoccupied for the time set by an occupancy sensor, but will only follow on-commands from a wall switch The nPP16 EFP family is capable of switching loads via an internal latching relay designed with robust protection from the harsh switching requirements of T5 fluorescent and LED loads
nLight Power/Relay Pack Occupancy Controller Dimmer NPP16 D ER EFP SA. To provide system power, the power pack transforms Class 1 line voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC. The nLight nPP16 Series power pack is the workhorse of an nLight system